Hoa Ý

Hoa Y



Hoa y
Hoa ý

TRANG CHỦ Sản phẩm Cannon Thiết bị đo độ nhớt và lưu tốc tự động CAV® 4.2 Dual-Bath Kinematic Viscometer



For Kinematic Viscosity of Transparent and Opaque Liquids

Meets all the requirements of ASTM D445/D446, ISO 3104/3105, IP 71

Dual, independent modular baths provide easy maintenance access and simultaneous testing at two

  different temperatures.

- Dual-bath, benchtop viscometer with two 14-position sample handlers

- Simple, out-of-the-box installation. No external components required

- Single unit runs using the on-board computer, without need for an external PC, or a single

  PC manages

  up to 4 units using VISCPRO® software

- Automated vial washing and drying reduces vial consumption 








  Maximum thoughput

24 tests per hour

  Automated sample capacity

28 positions (2 x 14 positions)

  Viscosity range

0.5 mm2/s (cSt) to 10,000 mm2/s (cSt) in 100-fold increments (depending on viscometer tube selection). Fast run tubes are also available.

  Timing resolution

0.01s (timing accuracy to ± 0.001 s)

20 °C to 100 °C, ± 0.01 °C (temperatures within 5 °C of ambient and below require bath cooling)

  Temperature range and accuracy

Up to 150 °C, ± 0.03 °C (with high temperature bath)

Down to 15 °C, ± 0.03 °C (with TE cooling)

  Minimum sample/solvent volume

8 mL sample/15 mL solvent per test (as little as 3 mL with fast run tubes)

  Operating conditions

15 °C to 30 °C, 10% to 75% relative humidity (non-condensing), Installation Category II; Pollution Degree 2

  Electrical specifications

100 Vac, 50/60 Hz; 115 Vac, 50/60 Hz; 230 Vac, 50/60 Hz; 1200 watts power consumption


CE Mark; EMC directive (2004/108/EC); Low voltage directive (2006/95/EC); HI-POT (1900 Vdc, 60 sec.); ROHS

  Additional standard features

Internal heated waste drain lines, dual solvent input

  Data output


  Dimensions (W × D × H)

36.0 cm × 66 cm.0 × 72.0 cm (14.3 in × 26.0 in × 28.5 in)


63 kg (140 lb)