K16200 Pensky-Martens Closed Cup Flash Tester

K16200 Pensky-Martens Closed Cup Flash Tester

K16200 Pensky-Martens Closed Cup Flash Tester

K16200 Pensky-Martens Closed Cup Flash Tester

K16200 Pensky-Martens Closed Cup Flash Tester
K16200 Pensky-Martens Closed Cup Flash Tester

TRANG CHỦ Sản phẩm Koehler Thiết bị kiểm tra điểm chớp cháy K16200 Pensky-Martens Closed Cup Flash Tester



Test Method
For flash point determinations of fuels, lubricating oils, liquids containing suspended solids and liquids that tend to form a surface film during testing.


Features and Benefits
Conforms to ASTM D93 and related specifications
Choice of electric or gas heating


K16200 Pensky-Martens Closed Cup Flash Tester
Determines flash points of a wide range of products by a closed cup method with two option speed stirring of the sample. Extensively used in shipping and safety regulations for detection of contamination by volatile and flammable materials in fuel oils and lubricating oils, and for characterization of hazardous waste samples.


Smooth operating cover mechanism slides shutter open and applies test flame at the turn of a knob. Cover fits over brass test cup and includes pilot flame, test flame reference bead, built-in stirrer and plated brass thermometer ferrule.


Electrically heated model is equipped with a 750W nickel-chromium heater with stepless variable control for accurate, repeatable temperature rate of rise settings per specifications. Heater unit is enclosed in a stainless steel housing with cooling vents. Includes line cord receptacle and switch for accessory slow speed stirrer.

Gas heated model has a built-in nickel plated brass natural gas burner, or can be supplied with an artificial gas burner or liquid propane burner (specify when ordering). Both models are mounted on a sturdy cast iron base.




Conforms to: ASTM D93; AASHTO T73-811; IP 34; ISO 2719; DIN 51758; FTM 791-1102; NF M 07-019

Electrical Requirements
115V 50/60Hz, Single Phase, 6.5A
220-240V 50-60Hz, Single Phase, 3.4A

Included Accessories
Brass Test Cup with Handle
Thermometer Holder

Dimensions lxwxh,in.(cm)
9.5x8x22.5 (24x20x57) with optional stirrer motor installed
Net Weight:
K16000: 21 lbs (9.5kg)
K16200/K16270: 24 lbs (10.9kg)





Phụ tùng tùy chọn thêm
Mã hàng
Mô tả
Điện áp

Thang nhiệt độ

Stirrer Motor
Slow speed gear motor rotates stirrer of Pensky-Martens Tester at 115rpm for Procedure A and at 250rpm for Procedure B. Includes adjustable support bracket and mounting rod. Installs in base of flash tester.

115V 50/60Hz

Stirrer Motor

220-240V 50Hz

ASTM 9F Thermometer  

20 to 230°F

250-000-09C ASTM 9C Thermometer  

-5 to +110°C

250-000-10F ASTM 10F Thermometer  

200 to 700°F

250-00-10C ASTM 10C Thermometer  

90 to 370°C

K16010 Cover Assembly
Complete assembly. Includes shutter, flame exposure device, stirrer and thermometer ferrule.
Brass Test Cup
With heat resistant handle.