Hoa Ý

Hoa Y

Hoay

Hoayco

Hoa y
Hoa ý

TRANG CHỦ Sản phẩm Cannon Thiết bị đo độ nhớt và lưu tốc tự động miniAV®-LT Single-Bath Kinematic Viscometer

For Sub-Zero Kinematic Viscosity of Transparent and Opague Liquids

Meets all precision specifications of ASTM D445/D446, ASTM D1655, ASTM D2532, DEF STAN 91:91, IP71, ISO 3104/3105

Peltier cooling is environmentally friendly and requires no external refrigeration

- Automated vial washing & drying reduces vial consumption and replaces manual washing

- Single PC manages up to 4 instruments using VISCPRO® software

- Operators replace tubes in minutes, eliminating the need to schedule related service calls

 

 

 

 

 

 

 

 

 

Specifications

  Maximum thoughput          

12 tests per hour

  Automated sample capacity

1

  Viscosity range

Up to 20,000 mm2/s (cSt) in 100-fold increments

(depending on viscometer tube selection)

  Timing resolution

0.01 s (timing accuracy to ± 0.001 s)

  Temperature range & accuracy

–20 °C to 30 °C ± 0.02 °C

  Minimum sample/solvent volume

5 mL sample*/15 mL solvent per test

  Operating conditions

15 °C to 30 °C, 10% to 75% relative humidity (noncondensing),

Installation Category II; Pollution Degree 2

  Electrical specifications

100 VAC, 50/60 Hz; 115 VAC, 50/60 Hz; 230 VAC, 50/60

Hz; 1,000 watt power consumption

  Compliance

CE Mark; EMC directive (2004/108/EC); Low voltage

directive (2006/95/EC); HI-POT (1900 VDC, 60 sec.);

ROHS

  Data output

RS-232 and RS-485

  Dimensions

(W x D x H)

Unit: 25.4 cm x 30.5 cm x 53.4 cm

(10 in x 12 in x 21 in)

Power Supply: 34.3 cm x 39.6 cm x 17.2 cm

(13.5 in x 15.6 in x 6.8 in)

Waste Receiver: 33.0 cm x 39.6 cm x 17.2 cm

(13.0 in x 15.6 in x 6.8 in)

Air/Water Heat Exchanger: 38.6 cm x 51.1 cm x 34.9 cm

(15.2 in x 20.1 in x 13.7 in)

  Weight

Unit: 27 kg (45 lb)

Power Supply: 11 kg (24 lb)

Waste Receiver: 6 kg (13 lb)

Air/Water Heat Exchanger: 14 kg (30 lb)