HOA Y CO LTD, HOA Y; CONG TY TNHH HOA Y;

CÔNG TY TNHH HOA Ý

HOA Y CO LTD

CÔNG TY HOA Ý

CÔNG TY HOA Ý

CÔNG TY HOA Ý
CÔNG TY HOA Ý

TRANG CHỦ Sản phẩm Cannon Thiết bị đo độ nhớt và lưu tốc tự động miniQV®-X Single-Bath Kinematic Viscometer

For Rapid Kinematic Viscosity of Transparent and Opague Liquids with Near ASTM 445 Precision

-  A 25-position sample handler allows unattended processing

- Automates labor intensive tasks of sample measurement and viscometer tube washing and drying

- Single PC manages up to 4 instruments using VISCPRO® software

- Uses disposable, low-cost HDPE sample vials

- Operators replace tubes in minutes, eliminating the need to schedule related service calls

 

 

 

 

 

 

 

 

 

 

 

 

Specifications:

Maximum thoughput          

20 tests per hour

Automated sample capacity

25

Viscosity range

5 mm²/s (cSt) to 800 mm²/s (cSt) in 10-fold increments at 40 °C*

5 mm²/s (cSt) to 50 mm²/s (cSt) in 10-fold increments at 100 °C

Timing resolution

0.01 s (timing accuracy to ± 0.001 s)

Temperature range & accuracy

40 °C and 100 °C, ± 0.01 °C

Minimum sample/

solvent volume

4 mL to 5 mL sample*/8 mL solvent per test

Operating conditions

15 °C to 30 °C, 10% to 75% relative humidity (non-condensing), Installation Category II; Pollution Degree 2

Electrical specifications

100 Vac, 50/60 Hz; 115 Vac, 50/60 Hz; 230 Vac, 50/60 Hz; 1000 watts power consumption

Compliance

CE Mark; EMC directive (2004/108/EC); Low voltage directive (2006/95/EC); HI-POT (1900 Vdc, 60 sec.); ROHS

Additional standard features

Internal heated waste drain lines, dual solvent input

Data output

            RS-232 and RS-485

Dimensions

(W x D x H)

Unit: 25.4 cm × 43.7 cm × 59.8 cm

 (10.0 in × 17.2 in × 23.5 in)

Power Supply: 33.0 cm × 39.6 cm × 17.2 cm

(13.0 in × 15.6 in × 6.8 in)

Waste Receiver: 33.0 cm × 39.6 cm × 17.2 cm

(13.0 in × 15.6 in × 6.8 in)

Weight              

Unit: 27 kg (60 lb)

Power Supply: 11 kg (24 lb)

Waste Receiver: 6 kg (13 lb)

*Extended tube ranges below 5 mm²/s (cSt) are available depending on sample and temperature selection. Contact Technical Service for additional information.