CÔNG TY TNHH HOA Ý

HOA Y CO LTD

CÔNG TY HOA Ý

CÔNG TY HOA Ý

CÔNG TY HOA Ý
CÔNG TY HOA Ý

TRANG CHỦ Sản phẩm Parr Stirred Reactor Series Series 4555 Floor Stand Reactors, 2.6 & 5 Gallon

 

The Model 4555 and 4557 Reactors with their 5 gallon (18.75 L) capacity are the largest stirred reactors offered by Parr. The 4556 and 4558 Models are similar units with a 10 liter (2.6 gal) volume which falls between the larger 5 gallon design and the smaller 1 and 2 gallon models in the 4550 Series. Vessel styles are offered in a moveable head or fixed head design.

These reactors are available with an FKM O-ring seal for operating temperatures to 225 °C, and FFKM O-ring for temperatures to 300 °C, or with a flat, PTFE gasket for operating temperatures up to 350 °C maximum.

In the moveable head design, the vessel is held in a support system which minimizes the physical effort required to handle these heavy components. The hoist is attached to a support column which provides a convenient means for lifting the head and cylinder out of the stand. These components may be transferred to the holding position on the right side of the stand. Vessels equipped with a bottom drain valve will probably remain in the heater most of the time, but can be lifted out when necessary.

The fixed head support stand features hinged split-rings that swing to either side allowing the head to remain fixed to the stand while a pneumatic lift allows the cylinder to be raised and lowered. When lowered, the cylinder can be slid forward for cleaning and servicing.

These reactors are generally used for pilot plant or for custom chemical production purposes, usually with a variety of attachments added to the basic units. Various heaters, larger motors, heavier stirrer drives and remote controls appropriate to the size of these reactors have been designed and are available. Modified versions of these units are available with higher working pressures and temperatures.

 

 

 

 

 

 

 

 

Series 4550 Accessories

Parr reactors and pressure vessels are offered with a number of options and accessories which permit the user to configure the system to their reactions and intended operating conditions. Details on these options are listed below:

4878 Automated Liquid Sampler
Catalyst Addition Devices
Catalyst Baskets
Condensers
Coned Pressure Fittings
Controllers
Cooling Coils
Equipment for Use in Potentially Ignitable Atmospheres
External Valves and Fittings
Gas Measurement Systems
--Intermediate Supply Tanks
--Mass Flow
--High Pressure Gas Burettes
Heater Options
Insulated Electrical Glands
Liners
Liquids Charging Systems
--Liquid Metering Pumps
--Liquid Charging Pipettes
Magnetic Drives
Pressure Gages
Pressure Hose
Safety Rupture Discs
Sample Collection Vessel
Solids Charging Systems
Spare Parts Kits
Split-Ring Closures
Stirrer Motor and Drives
--Stirrer Options
--Gas Entrainment Impellers
Temperature Limits
Thermocouples
Valves and Fittings
--Bottom Drain Valves
--Manual Control Valves for Compressed Gas Tanks
--Pressure Relief Valves
--Safety Check Valves
Windows
 
Click Here to download Options and Accessories in PDF format

 

Series 4550 Ordering Guide

The System Identification No. for the Base System is:
455__-T-SS-HD-230-VS.75-2000-SC-C3-4848-ASME

Click on the selections below to develop a composite identification number which may be used to request a quote or to order a 4555 Series Reactor.