TRANG CHỦ Sản phẩm Tanaka Thiết bị đo điểm chớp cháy Thiết bị đo điểm chớp cháy cốc kín atg-8w/8l
Conforms to Standards Test Methods: ASTM D56, IP 304, JIS K2265-1
- Model atg-8 is an automated Tag Closed Cup flash point tester.
- Easy Operation: Select a test mode and enter the expected flash point; while the instrument executes
the test, you are free to do other lab work. The test result is brightly shown on the color LCD module.
- Interchangeable Ignition Source: atg-8w/atg-8l is equipped with both gas and electric igniter as the
ignition source. It only takes a few minutes to switch from gas to electric or vice versa.
- In addition to model atg-8w with conventional water bath, model atg-8l with metal block bath
is available for low temperature range.
- The cooling / heating for model atg-8l is by liquid cooled Peltier modules. (Model atg-8l requires
an optional chiller.)
Specifications
|
Test Methods |
ASTM D56, IP 304, JIS K2265-1 |
|
Measuring Range |
ambient to +95°C for atg-8w -20°C to +95°C for atg-8l (with an optional chiller) |
|
Ignition source |
Gas flame or Electric Coil |
|
Temperature Sensor |
PT-100 in stainless steel sheath |
|
Flash Detector |
CRC Thermocouple |
|
Operating Environment |
10°C to 35°C |
|
Power consumption |
500W (atg-8w), 250W (atg-8l) |
|
Size |
230(W) × 470(D) × 385(H) mm |
|
Net Weight |
17kg |
